How to install an alicantina blind

An alicantina blind is characterized because its operation is very simple and because it helps protect from the sun and prevents the introduction of harmful external agents, such as insects or pollen. ideal for adaptation to all types of housing. Therefore, in the following post we are going to show you how to install an alicantina blind in your house.

How to measure and install an alicantina blind

One of the advantages of opting for an alicantina blind is that it is not necessary to have a lot of knowledge to measure and install it. It is important that, in any case, you leave a margin of 15 or 20 centimeters from the upper hole upwards, so that your blind can rest there when it is rolled up.

On the other hand, if it reaches the ground you have to leave 1 or 2 cm distanceIn the case of normal windows, you have to add 10 to 15 cm from the bottom downwards. On the other hand, in the case of the lateral ones, you have to leave between 10 or 12 cm on each side. On the other hand, the installation is very simple and, in order to carry it out, you have to perform the following steps:

1. Insert two open eyeboltsshould be centered about 5 cm from each edge.
2. Marks the attachment pointsYou have to do this by holding the shutter tightly at the top of the opening.
3. Place a cue at each pointDrill a hole and insert a dowel and closed eyebolts.
4. Hang the blind.

Types of installation of alicantina blinds

The installation of your alicantina shutter varies depending on the type of window you have; the following are the most common ones. different types of installation you can perform.

Embedded in a window opening

This option is usually the most common, for both doors and windows. The first thing you have to do is to measure the width in three different parts; this way, you make sure that the wall does not have any unevenness.

In any case, you must choose the narrower size and add 2 centimeters to it.so that there is 1 centimeter on each side. On the other hand, you have to measure the height of your window or door and subtract 2 centimeters, so that the hanging points breathe and do not rub the blind at the bottom. In this case, the eyebolts must also be installed between 7 and 10 centimeters at the top of the window.

To cover a passage without door or window

If you are going to cover the space destined to a door or a window, but you do not have these elements, the measures of your alicantina blind are different. The first thing you have to do is measure the width of the holeIt is best to use a metal tape measure, as the fabric or plastic ones are more inaccurate.

Add 10 centimeters to the size of the opening, so that the blind will protrude 5 cm on each side. Then you have to measure the height and add 25 cmThis way, when you pull it all the way up, it will fit perfectly.

It is also important that you let between 1.5 and 2 cm on the lower partto prevent the shutter from rubbing against the floor and damage more easily. For their part, the eyebolts should be placed at a distance between 7 and 10 centimeters; in this way, you compensate the weight of the blind and make it easier to operate.

Completely covering a conventional window

This process is exactly as in the previous caseYou must measure the height and width and add 25 centimeters and 10 centimeters respectively; in addition, you must also leave between 1.5 and 2 centimeters at the bottom and the eyebolts must be placed between 7 and 10 centimeters.

As you have seen, installing an alicantina blind is very simple and will not take much time, so do not wait any longer and get the ideal model for your home. Avoid the entry of the most annoying sun and prevent the entry of mosquitoes in your home thanks to these elegant, practical and easy to use products. What are you waiting for to get yours?